PUHTIS® PEILI™ +Starter Kit

How it works — a simple routine for cleaner airflow

Maintain your heat pump yourself — no dismantling required.

PUHTIS® cleaning is designed to support safe and regular user maintenance without opening or disassembling the device.

Tasks involving dismantling, refrigerants or electrical components should always be handled by a qualified professional.

1. Turn off the power

Always switch off the device before cleaning.

2. Remove the filters

Carefully slide the filters out of the indoor unit and rinse them gently with water.

3. Brush away dry dust and debris

Use the included brushes to remove visible dust from the coil fins and blower wheel.

Note: The blower wheel should be cleaned dry only, as there is no separate water collection tray beneath it.

4. Vacuum remaining particles

Vacuum loose dust to support a more thorough cleaning result.

5. Apply Puhtis® cleaner

Spray the cleaning solution evenly onto the metal coil surfaces and fins.

Protect surrounding areas if necessary.

6. Rinse with clean water

Rinse carefully with clean water.

The rinse water flows through the unit’s normal condensate drainage system, just like during regular operation.

Allow the unit to dry — then enjoy fresher airflow and a cleaner indoor environment again.

Designed for visible maintenance

PUHTIS® PEILI supports regular visual inspection as part of everyday use.

Its visual mesh structure is designed to help users notice changes related to airflow, usage conditions and routine maintenance needs over time.

Look. Notice. Act.

Important notes

✔ Designed for regular self-maintenance ✔ No dismantling required ✔ Internal servicing and deep maintenance → qualified technician only ✔ Always ensure that water can flow freely into the drainage system ✔ Cleaning intervals depend on usage time, airflow volume and environmental conditions

— EU Registered Design —

Consumer customers have the right to cancel their order and return unused, resaleable products within 30 days of delivery.

Returned items must be in their original condition and packaging.

We currently deliver to Finland and Sweden.

Estimated delivery time is 1–5 business days.

Delivery times may vary slightly depending on location.

Ihonsuojaus: Suositellaan käytettäväksi nitriilikäsineitä (esim. paksuus 0,35 mm, läpäisyaika >480 min, EN 374). Tarkista käsineiden kunto ennen käyttöä. Riisu käsineet varovasti välttäen kosketusta ulkopintaan.

Silmiensuojaus: Suositellaan käytettäväksi tiiviisti istuvia suojalaseja. Pidä silmähuuhtelumahdollisuus saatavilla. Tarvittaessa käytä kasvosuojausta ja soveltuvaa suojavaatetusta.

Ympäristö: Puhdistuksessa syntyy pieni määrä jätevettä, joka voidaan johtaa viemäriin paikallisten määräysten mukaisesti. Hävitä tyhjät pakkaukset paikallisten jätehuoltomääräysten mukaisesti.